Asus P2L97-S Quick Start Instructions, Windows95 or WindowsNT, Windows/Windows for Workgroups, DOS, VII. ADAPTEC EZ-SCSIUTILITY, 3Click the Start button and select Run

VII. ADAPTEC EZ-SCSI UTILITY

Welcome to Adaptec EZSCSIVI. ADAPTEC EZ-SCSI UTILITY 4.00e Adaptec EZSCSI gives you what you need to use your SCSI devices most effectively with Windows® 95 and WindowsNT™. You can also use Adaptec EZSCSI on computers running DOS, Windows® 3.1x, or Windows for Workgroups3.1x.

Quick Start Instructions

First, install SCSI devices (see the hardware documentation for details). Then follow the instructions for your operating system software in one of the following sec- tions. We recommend that after you install Adaptec EZSCSI you run SCSITutor to learn more about the features of SCSI.

Windows95 or WindowsNT

If you want to install Windows95 or WindowsNT on a new computer system, you may not be able to access your SCSI CDROM drive at first. (Usually, you install Windows95 and WindowsNT from a CDROM disc.) To gain access to your CDROM drive, follow the DOS Quick Start instructions on page 4. Then reboot your computer and follow these instructions:

1Install Windows95 or WindowsNT version 3.51 or above, and start it running on your computer.

2Insert the Adaptec EZSCSI Setup Diskette in your floppy disk drive.3Click the Start button and select Run.

4Type a:\setup if you are using the A drive or b:\setup if you are using the B drive. Then click OK.

5Follow the instructions that appear on the screen.

Windows/Windows for Workgroups 3.1x

1Install Windows3.1x or Windows for Workgroups3.1x and start it running on your computer.

2Insert the Adaptec EZSCSI Setup Diskette in your floppy disk drive.

3Select File/Run from the Program Manager menu.

4When the Run dialog box appears, type a:\setup if you are using the A drive or b:\setup if you are using the B drive. Then click OK.

5Follow the instructions that appear on the screen.

DOS

1Install DOS6.x or above and start it running on your computer.

2Insert the Adaptec EZSCSI Setup Diskette in your floppy disk drive.

3At the DOS prompt, type a:\install (assuming your 3.5” floppy is A: drive). Then press Enter.

4Follow the instructions that appear on the screen.

VII. EZ-SCSI UTILITY (Intro/Quick Start)

ASUS P2L97-S User’s Manual 61