Asus P2L97-S 7.To quit afdisk, press Esc and select Yes to confirm that you want to quit

UTILITY SCSI-EZ .VII(Partitioning)

VII. ADAPTEC EZ-SCSI UTILITY

3.To create a new partition on the disk device, press Ins. A screen similar to this appears:

Adaptec SCSI Disk Setup Program v3.33

	Select SCSI Device to Partition			Type	Start End Megs
HA #0 - Target 0		QUANTUM LP105S		910109405
HA #0 - Target 4		IOMEGA	BETA90
Logical Drive Info
64	head
32	sectors/track
85	cylinders		Create a DOS Partition
512	bytes/sector
			Start Cylinder:
85	megabytes				0
			End Cylinder:		84
2AEEFh blocks
	<Ins> Create, <Del>		Delete, <F1> Help,		<Esc> Exit

The Create a DOS Partition window suggests that you create one partition on the disk device, equal to its entire capacity. If this is what you want to do, skip to step5.

4.To change the size of the partition, use the arrow keys to select Start Cylinder and End Cylinder, and type in the numbers you want. Partitions up to 2Gigabytes are supported.

5.When the number of cylinders is what you want, press Esc. When the confir- mation prompt appears, select Yes and press Enter to create the partition.

To create more partitions on the same disk device, repeat steps 3, 4, and 5. As you create partitions on the disk, they are added to the window at the upper right of the screen, as shown here:

Adaptec SCSI Disk Setup Program v3.33

		Type	Start		End	Megs
Select SCSI Device to Partition		DOS		0	84	85
HA #0 - Target 0
	QUANTUM LP105S 910109405
HA #0 - Target 4	IOMEGA BETA90

Logical Drive Info

64 head

32sectors/track

85cylinders

512 bytes/sector

85megabytes 2AEEFh blocks

<Ins> Create, <Del> Delete, <F1> Help, <Esc> Exit

6.Press Esc to return to the Select SCSI Device to Partition window. If you want to partition a different disk device, select the device from the list and repeat the earlier steps.

7.To quit afdisk, press Esc and select Yes to confirm that you want to quit.

68 ASUS P2L97-S User’s Manual