3.HARDWARE SETUP

12)Wake-On-LAN Connector (3-pin WOL_CON)

The WOL_CON connector powers up the system when a wake-up packet or signal is received from the network through the ASUS PCI-L101 LAN card.

IMPORTANT: This feature requires that Wake-On-LANis set to Enabled (see

4.5.1Power Up Control) and that your system has anATX power supply with at least 720mA +5V standby power.

 

WOL_CON

-F

+5VSB

P3B

 

 

Ground

 

PME

P3B-F Wake-On-LAN Connector

13)Wake-On-Ring Connector (2-pin WOR)

This connector connects to an internal modem card with a Wake-On-Ring out- put. The connector powers up the system when a ringup packet or signal is re- ceived through the internal modem card. NOTE: For external modems, Wake- On-Ring is detected through the COM port.

IMPORTANT: This feature requires that PWR Up On Modem Act is set to

Enabled (see 4.5.1 Power Up Control).

H/W SETUP

Connectors

3.

 

 

 

P3B-F

WOR

PIXRI# Ground

2 1

P3B-F Wake-On-Ring Connector

ASUS P3B-F User’s Manual

35