9.Line out selector (2-pin LO_L, LO_R) (on audio models only)

By default, these jumpers are shorted (jumper caps on) to route the signal from the audio controller to the rear panel Line Out jack to make it available for audio out devices such as speakers or a headphone. If you connect the Intel Front Panel audio cable to the AAPANEL connector (see page 2-30 for the location), remove the caps from these jumpers to allow automatic switching of audio signal between the rear panel Line Out jack and the Intel audio cable.

P4B266-C

BLOL

FLOL

LO_L BLOR FLOR

LO_R

P4B266-C Internal Line Out Connectors

10.LAN setting (3-pin LAN_ENABLE) (on LAN models only)

This jumper allows you to enable or disable the onboard Local Area Network (LAN) feature. Keep the default setting Enabled if you wish to connect your computer to a network.

 

 

LAN_ENABLE

 

1

2

2

3

P4B266-C

ENABLE

DISABLE

 

(Default)

 

 

P4B266-C LAN Setting

2-22

Chapter 2: Hardware information