7.Front panel audio connector (10-1 pin IAPANEL1)

This is an interface for the front panel cable that allows convenient connection and control of audio devices.

Be default, the pins labeled LINE OUT_R/BLINE_OUT_R and the pins

LINE OUT_L/BLINE_OUT_L are shorted with jumper caps. Remove the caps only when you are connecting the front panel audio cable.

IAPANEL1

MIC2 AGND

MICPWR +5VA

Line out_R BLINE_OUT_R

NC

 

 

P4BP-MX

 

 

 

 

 

Line out_L

 

BLINE_OUT_L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

P4BP-MX Front Panel Audio Connector

8.Chassis intrusion connector (4-1 pin CHASSIS1)

This lead is for a chassis designed with intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins.

P4BP-MX

CHASSIS1

+5VSB MB

Chassis Signal GND

P4BP-MX Chassis Alarm Lead

ASUS P4BP-MX motherboard

1-19