Asus P4C800-E 4.4.3 Chipset, Configure DRAM Timing by SPD [Enabled], Performance Acceleration Mode [Auto], DRAM Idle Timer [Auto], DRAM Refresh Mode [Auto]

4.4.3 Chipset

The Chipset menu items allow you to change the advanced chipset settings. Select an item then press Enter to display the sub-menu.

Advanced Chipset settings

WARNING: Setting wrong values in the sections below may cause system to malfunction.

Configure DRAM Timing by SPD	[Enabled]
Performance Acceleration Mode	[Auto]
DRAM Idle Timer	[Auto]
DRAm Refresh Rate	[Auto]
Graphic Adapter Priority	[AGP/PCI]
Graphics Aperture Size	[ 64 MB]
Spread Spectrum	[Enabled]
ICH Delayed Transaction	[Enabled]
MPS Revision	[1.4]

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Configure DRAM Timing by SPD [Enabled]

When this item is enabled, the DRAM timing parameters are set according to the DRAM SPD (Serial Presence Detect). When disabled, you can manually set the DRAM timing parameters through the DRAM sub-items. Configuration options: [Disabled] [Enabled]

Performance Acceleration Mode [Auto]

Allows boost in system performance. Configuration options: [Auto] [Enabled]

DRAM Idle Timer [Auto]

Configuration options: [Infinite] [0T] [8T] [16T] [64T] [Auto]

DRAM Refresh Mode [Auto]

Configuration options: [Auto] [15.6 uSec] [7.8 uSec] [64 uSec] [64T]

If the system becomes unstable after changing the settings of any of the above items, revert to the default settings.

4-18 Chapter 4: BIOS Setup