2.7Jumpers

1.Keyboard power (3-pin KBPWR)

This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS (see section 4.5.1 Power Up Control).

KBPWR

1

2

 

2

3

 

 

 

 

 

+5V +5VSB (Default)

P4C800

P4C800 Keyboard Power Setting

2.USB device wake-up (3-pin USBPW12, USBPW34, USBPW56, USBPW78)

Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode).

The USBPWR12 and USBPWR34 jumpers are for the rear USB ports. The USBPWR56 and USBPWR78 jumper is for the internal USB header that you can connect to the front USB ports.

 

USBPW12

 

 

 

 

+5V

+5VSB

 

(Default)

 

 

 

1

2

2

3

 

USBPW34

 

 

 

 

+5V

+5VSB

 

(Default)

 

 

P4C800

1

2

2

3

 

 

USBPW78

 

 

 

 

USBPW56

 

 

 

P4C800 USB Device Wake Up

+5V

+5VSB

(Default)

 

 

ASUS P4C800 Deluxe motherboard user guide

2-19