7.Front panel audio connector (10-1 pin FP_AUDIO)

This is an interface for the front panel cable that allows convenient connection and control of audio devices.

Be default, the pins labeled LINE OUT_R/BLINE_OUT_R and the pins

LINE OUT_L/BLINE_OUT_L are shorted with jumper caps. Remove the caps only when you are connecting the front panel audio cable.

P4GE-MX

AGND +5VA BLINE OUT R

BLINE OUT L

FP_AUDIO

Line out_L

NC

Line out_R

MICPWR

MIC2

P4GE-MX Front panel audio connector

8.Chassis intrusion connector (4-1 pin CHASSIS1)

This lead is for a chassis designed with intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins.

CHASSIS

+5VSB MB

Chassis Signal GND

P4GE-MX

(Default)

P4GE-MX Chassis intrusion connector

ASUS P4GE-MX motherboard

1-19