Asus P4P800-X 1.6.2 Installing the CPU, the base of the socket lever, socket until it fits in place, Position the CPU above the socket, Carefully insert the CPU into the

1.6.2 Installing the CPU

Follow these steps to install a CPU.1.Locate the 478-pin ZIF socket on the motherboard.

2.Unlock the socket by pressing the lever sideways, then lift it up to a 90°- 100° angle.

Socket Lever 90 - 100

Make sure that the socket lever is lifted up to 90°-100° angle, otherwise the CPU does not fit in completely.

3.	Position the CPU above the socket	Gold Mark
	such that its marked corner matches
	the base of the socket lever.
4.	Carefully insert the CPU into the
	socket until it fits in place.

The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to prevent bending the pins and damaging the CPU!

5.When the CPU is in place, push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.

6.Install a CPU heatsink and fan following the instructions that came with the heatsink package.

7.Connect the CPU fan cable to the CPU fan connector on the motherboard.

Connect the 4-pin ATX power connectors after you install the CPU.

1-8 Chapter 1: Product introduction