Asus P4P800-X Chapter 1: Product introduction, •Reset Switch Lead (Blue 2-pinRESET), •Hard Disk Activity Lead (Red 2-pinIDE_LED)

•Reset Switch Lead (Blue 2-pin RESET)

This 2-pin connector connects to the case-mounted reset switch for rebooting the system without turning off the system power.

•ATX Power Switch/Soft-off Switch Lead (Light Green 2-pin PWR)

This connector connects a switch that controls the system power. Pressing the power switch turns the system between ON and SLEEP, or ON and SOFT OFF, depending on the BIOS or OS settings. Pressing the power switch while in the ON mode for more than 4 seconds turns the system OFF.

•Hard Disk Activity Lead (Red 2-pin IDE_LED)

This connector supplies power to the hard disk activity LED. The read or write activities of any device connected to the primary or secondary IDE connector cause this LED to light up.

The System Panel connector is color-coded for easy and foolproof connection. Take note of the specific connector colors as described.

1-26 Chapter 1: Product introduction