4.RAID ATA/133/100/66/33 connectors (40-1 pin PRI_RAID1, SEC_RAID1)

These connectors support either RAID 0, RAID 1, RAID 0 + 1 or JBOD configuration through the onboard VIA® 6410 controller. You can use the RAID feature to set up a disk array configuration and to support additional IDE devices.

P4P800

P4P800 RAID Connectors

 

 

 

 

PIN 1

 

 

NOTE: Orient the red markings

 

 

 

 

RAID1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(usually zigzag) on the IDE

 

 

 

 

 

 

ribbon cable to PIN 1.

 

 

 

 

SEC

PIN 1

PRI_RAID1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Important notes on the RAID feature:

•By default, the drive that you connect to the PRI_RAID connector follow the ATA133/100/66/33 protocol as an independent drive, not as a disk array.

•The RAID/SATA controller chipset does not support ATAPI devices such as CD-ROMs, DVD-ROMs, etc.

•RAID feature only supported in Microsoft Operating Systems.

5.SMBus connector (6-1 pin SMB1)

This connector allows you to connect SMBus (System Management Bus) devices. Devices communicate with an SMBus host and/or other SMBus devices using the SMBus interface.

P4P800

P4P800 SMBus Connector

SMB1

1

 

FLOATING SMBCLK

Ground SMBDATA +3V

ASUS P4P800 Deluxe motherboard user guide

2-27