2.Key-in a unique name for your RAID volume then press <Enter>.

3.Use the Up and Down arrow keys to select your desired RAID Level then press <Enter>.

4.If you selected RAID 0 (Stripe), use the Up and Down arrow keys to select the stripe size for your RAID 0 array then press <Enter>.The available values range from 8 KB to 128 KB. The strip value should be chosen based on the planned drive usage. Some suggested selections are listed below. The default selection is 64 KB.

•16 KB - low disk usage

•64 KB - typical disk usage

•128 KB - performance disk usage

5.On the Create Volume prompt, press <Enter> to create the array. The utility prompts a confirmation message, press <Y>.

Are you sure you want to create this volume (Y/N)

6.Select 4 Exit then press <Enter> to exit the RAID configuration utility. The utility prompts a confirmation message, press <Y>.

5.6.5 Deleting a RAID Volume

Copyright(C) 2003 Intel Corporation. All Rights Reserved. v3.x.x.xxxx

 

 

[ DELETE ARRAY MENU ]

 

Name

Level

Drives 

Capacity Status

Bootable

RAID_Volume1

RAID0(Stripe) 2

149.0GBNormal

Yes

[ HELP ]

Deleting a volume will destroy the volume data on the drive(s) and

cause any member disks to become available as non-RAID disks.

WARNING:EXISTING DATA WITHING THIS VOLUME WILL BE LOST AND NON-RECOVERABLE

[ ]-Change [TAB]-Next [<ESC>]-Previous Menu [<DEL>]-Delete Volume

Take caution in using this option; All data on the RAID drives will be lost!

To delete a RAID volume:

1.Select 2 Delete RAID Volume then press <Enter>.

ASUS P4P800 SE motherboard

5-19