12.System panel connector (20-pin PANEL)

This connector accommodates several system front panel functions.

 

 

Speaker

Power LED

Connector

 

 

PLED+

PLED-

+5V

Ground Ground Speaker

IDE LED+

IDE LED-

ExtSMI# Ground PWR Ground

Reset Ground

IDE_LED

 

Reset SW

ATX Power

P4P800 SE

 

SMI Lead

Switch*

* Requires an ATX power supply.

P4P800 SE System Panel Connectors

•System Power LED Lead (Green 3-1 pin PLED)

This 3-1 pin connector connects to the system power LED. The LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

•System Warning Speaker Lead (Orange 4-pin SPKR)

This 4-pin connector connects to the case-mounted speaker and allows you to hear system beeps and warnings.

•Reset Switch Lead (Blue 2-pin RESET)

This 2-pin connector connects to the case-mounted reset switch for rebooting the system without turning off the system power.

•ATX Power Switch / Soft-Off Switch Lead (Yellow 2-pin PWRBTN )

This connector connects a switch that controls the system power. Pressing the power switch turns the system between ON and SLEEP, or ON and SOFT OFF, depending on the BIOS or OS settings. Pressing the power switch while in the ON mode for more than 4 seconds turns the system OFF.

•System Management Interrupt Lead (Light Blue 2-pin SMI)

This 2-pin connector allows you to manually place the system into a suspended mode, or “green” mode, where system activity is instantly decreased to save power and to expand the life of certain system components. Attach the case-mounted suspend switch to this 2-pin connector.

ASUS P4P800 SE motherboard

2-33