1.11Jumpers

1.Keyboard power (3-pin KBPWR1)

This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS.

P4PE BP

KBPWR1

1

2

 

2

3

 

 

 

 

 

+5V +5VSB (Default)

P4PE BP Keyboard Power Setting

2.Wireless PCI and USB settings (3-pin WPCI_USB)

These jumpers are reserved. DO NOT change the default settings.

WPCI_USB

3

1

5

3

P4PE BP

 

 

 

4

2

6

4

Wireless

Original

PCI_USB

 

PCI

 

 

reserved pin

P4PE BP WPCI_USB Setting

 

(Default)

1-16

Chapter 1: Product introduction