10.USB header (10-1 pin USB_56)

If the USB ports on the rear panel are inadequate, a USB header is available for additional USB ports. The USB header complies with USB 2.0 specification that supports up to 480 Mbps connection speed. This speed advantage over the conventional 12 Mbps on USB 1.1 allows faster Internet connection, interactive gaming, and simultaneous running of high-speed peripherals.

If your package came with a USB 2.0/GAME module, connect the USB cable to this header. The module has two USB 2.0 ports that support the next generation USB peripherals such as high resolution cameras, scanners, and printers.

You must install the driver before you can use the USB 2.0 capability.

P4PE BP

NC

GND

LP5+

LP5-

USB+5V

USB_56

P4PE BP USB 2.0 Header

1

USB+5V LP4- LP4+ GND

11.Internal audio connectors (4-pin CD1, AUX1, MODEM1) (on audio models only)

These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card. The MODEM connector allows the onboard audio to interface with a voice modem card with a similar connector. It also allows the sharing of mono_in (such as a phone) and a mono_out (such as a speaker) between the audio and a voice modem card.

MODEM1

Modem-Out

Ground

Ground

Modem-In

P4PE BP

CD1(Black) AUX1 (White)

Left Audio Channel

Ground

Ground

Right Audio Channel

P4PE BP Internal Audio Connectors

ASUS P4PE BP motherboard user guide

1-23