3.Line out selector (FP_LO_SWR, FP_LO_SWL) (on audio models only)

By default, these jumpers are shorted (jumper caps on) to route the signal from the audio controller to the rear panel Line Out jack to make it available for audio out devices like speakers or headphones.

If you connect the Intel Front Panel audio cable to the FP_Audio connector (see page 38 for the location), remove the caps from these jumpers to allow automatic switching of audio signals between the rear panel Line Out jack and the audio cable.

P4S533-VM

BLOR FLOR FP_LO_SWR FP_LO_SWL BLOL FLOL

P4S533-VM Internal Line Out Connectors

26

Chapter 2: Hardware information