8.Monitor Output Connector (Blue 15 pin VGA) This connector supports a VGA-compatible device.

VGA Monitor (15-pin female)

9.Fast-Ethernet Port Connector (RJ45) (optional)

This RJ45 connector is located on top of the USB Ports 0 & 1. The RJ45 supports connectivity for local area networks.

RJ-45

10.IDE Activity LED (2-pin IDELED)

This connector supplies power to the hard disk activity LED. The read or write activities of any device connected to the primary or secondary IDE connector cause this LED to light up.

P4S533-VM

TIP: If the case-mounted LED does not light, try reversing the 2-pin plug.

IDE_LED1

P4S533-VM IDE Activity LED

Some pins are used for connectors or power sources. These are clearly distinguished from jumpers in the Motherboard Layout. Placing jumper caps over these connector pins will cause damage to your motherboard.

32

Chapter 2: Hardware information