4.ATX power connectors (20-pin ATXPWR, 4-pin ATX12V)

These connectors connect to an ATX 12V power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

In addition to the 20-pin ATXPWR connector, this motherboard requires that you connect the 4-pin ATX +12V power plug to provide sufficient power to the CPU.

Make sure that your ATX 12V power supply can provide 8A on the +12V lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum recommended wattage is 230W, or 300W for a fully configured system. The system may become unstable and may experience difficulty powering up if the power supply is inadequate.

SEMX -ATX12V P4S800

GND GND

+12V DC +12V DC

P4S800-MX SE ATX power connectors

ATXPWR

+12.0VDC +5.0VDC

+5VSB +5.0VDC

PWR_OK -5.0VDC

COM GND

+5.0VDC COM

COM COM

+5.0VDC PS_ON#

COM COM

+3.3VDC -12.0VDC

+3.3VDC +3.3VDC

1-20

Chapter 1: Product introduction