3.HARDWARE SETUP
3.2Layout Contents
Motherboard Settings |
|
| |
1) | JEN | p.18 | JumperFree™ Mode (Enable/Disable) |
2) | USBPWR | p.19 | USB Device Wake Up (Enable/Disable) |
3) | SW1 | p.20 | CPU External Frequency Setting |
4) | SW1 | p.22 | CPU Core:Bus Frequency Multiple Setting |
1) | RIMMA1/A2/B1/B2 | p.23 | |
2) | CPU | p.25 | Central Processing Unit (CPU)6 |
3) | PCI1/2/3/4/5 | p.31 | |
4) | AGPPRO | p.32 | Accelerated Graphics Port (AGP Pro) Slot |
1) | PS2KBMS | p.33 | PS/2 Mouse Connector |
2) | PS2KBMS | p.33 | PS/2 Keyboard Connector |
3) | USB | p.34 | Universal Serial Bus Ports (Two |
4) | PRINTER | p.34 | Parallel Port Connector |
5) | COM1/COM2 | p.34 Serial Port Connectors (Two | |
6) | RJ45 | p.35 | Fast Ethernet Port Connector (optional) |
7) | PRIMARY/SECONDARYIDE p.35 | Primary/Secondary IDE Connectors (Two | |
8) | FLOPPY | p.36 | Floppy Disk Drive Connector |
9) | CPU_FAN, PCI_FAN | p.36 | CPU, PCI, MAIN Fan Connectors (Three |
| MAIN_FAN |
|
|
10) | SMB | p.37 | SMBus Connector |
11) | CHASSIS | p.37 | Chassis Intrusion Connector |
12) | WOL | p.38 | |
13) | WOR | p.38 | |
14) | USB2 | p.39 | USB Header |
15) | HDDLED | p.39 | Hard Disk Drive Activity LED Lead (2 pins) |
16) | SCSILED | p.39 | SCSI Activity LED Connector (4 pins) |
17) | IR | p.40 | Infrared Module Connector (5 pins) |
18) | TR2 | p.40 | Device Thermal Sensor Connector (2 pins) |
19) | ATXPWR, AUXPWR, | p.41 | ATX 12V Power Supply Connectors |
| ATX12V |
|
|
20) | PWRLED (PANEL) | p.42 | System Power LED Lead |
21) | KEYLOCK (PANEL) | p.42 | Keyboard Lock Switch Lead (2 pins) |
22) | SPEAKER (PANEL) | p.42 | System Warning Speaker Connector (4 pins) |
23) | MSG.LED (PANEL) | p.42 | System Message LED (2 pins) |
24) | SMI (PANEL) | p.42 | System Management Interrupt Switch Lead (2 pins) |
25) | PWRSW (PANEL) | p.42 | ATX Power / |
26) | RESET (PANEL) | p.42 | Reset Switch Lead (2 pins) |
3. H/W SETUP
Layout Contents
ASUS P4T User’s Manual | 15 |