Asus P4U800-X manual 29

7.Front panel audio connector (10-1 pin FP_AUDIO)

This is an interface for the front panel cable that allows convenient connection and control of audio devices.

Be default, the pins labeled LINE OUT_R/BLINE_OUT_R and the pins

LINE OUT_L/BLINE_OUT_L are shorted with jumper caps. Remove the caps only when you are connecting the front panel audio cable.

P4U800-X	FP_AUDIO
	MIC2	AGND
	MICPWR	+5VA
	Line out_R	BLINE_OUT_R
	NC
	Line out_L	BLINE_OUT_L

P4U800-X Front panel audio xonnector

8.Chassis intrusion connector (4-1 pin CHASSIS1)

This lead is for a chassis designed with intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins.

P4U800-X

+5VSB MB Chassis Signal GND

CHASSIS1

(Default)

P4U800-X intrusion connector

ASUS P4U800-X motherboard 1-19