Asus P4U800-X IRQ Resources, PCI IRQ Actived By [Level], Assign IRQ for VGA [Enabled], Assign IRQ for USB [Enabled], PCI Latency Timer (CLK) [64]

IRQ Resources

		IRQ Resources
IRQ-3	assigned to	[		]
			PCI Device
IRQ-4	assigned to	[PCI Device]
IRQ-7	assigned to	[PCI Device]
IRQ-9	assigned to	[PCI Device]
IRQ-10 assigned to		[PCI Device]
IRQ-11 assigned to		[PCI Device]
IRQ-12 assigned to		[PCI Device]
IRQ-14 assigned to		[PCI Device]
IRQ-15 assigned to		[PCI Device]

Select Menu

Item Specific Help

Legacy ISA for devices compliant with the original PC AT bus specification, PCI/ISA PnP for devices compliant with the Plug and Play standard whether designed for PCI or ISA bus architecture.

F1

:

Help

↑↓

:

Select

Item

-/+

:

Change

Value

F5 :

Setup Defaults

ESC

:

Exit

→←

:

Select

Menu

Enter

:

Select

Sub-menu

F10 :

Save and Exit

IRQ 3, 4, 7, 9, 10, 11, 12, 14, 15 assigned to [PCI Device]

The IRQ Resources sub-menu is activated when the Resources Controlled by parameter is set to [Manual]. Select [PCI Device] to assign an IRQ address to a Plug and Play device. Setting to [Reserved] reserves the IRQ address. Configuration options: [PCI Devices] [Reserved]

PCI/VGA Snoop Palette [Disabled]

Some non-standard VGA cards, like graphics accelerators or MPEG video cards, may not show colors properly. Setting this field to [Enabled] corrects this problem. If you are using a standard VGA card, leave this field to the default setting [Disabled]. Configuration options: [Disabled] [Enabled]

Assign IRQ for VGA [Enabled]

Setting this option to [Enabled] allows the BIOS to automatically assign an IRQ address for the VGA controller. Configuration options: [Disabled] [Enabled]

Assign IRQ for USB [Enabled]

Setting this option to [Enabled] allows the BIOS to automatically assign an IRQ address for the USB controller. Configuration options: [Disabled] [Enabled]

PCI Latency Timer (CLK) [64]

This option allows you to set the PCI latency timer. Select this option, then press <Enter>. Enter a value (0 ~ 255) to set the timer.

PCI IRQ Actived By [Level]

Sets the PCI IRQ Active mode. Configuration options: [Edge] [Level]

ASUS P4U800-X motherboard 2-21