Asus P5B HDD0:, HDD1:, 319 GB, Capacity, Non-RAID, Non-RAID, Block: N/A, Model Name, Type/Status, Name : JRAID, Name : JRAID, Name : JRAID, Block: 128 KB

2.When the Level item is highlighted, use the up/down arrow key to select the RAID set that you want to create.

[Create New RAID]Name : JRAIDLevel: 0-StripeDisks: Select DiskBlock: 128 KBSize : 319 GBConfirm Creation

[Create New RAID]

Name : JRAID

Level: 1-Mirror

Disks: Select Disk

Block: N/ASize : 159 GB

Confirm Creation

3.When the Disks item is highlighted, use the up/down arrow key to highlight an HDD that you want to belong to the RAID set, then press the space bar to confirm selection. Repeat the process until the HDDs are selected.

A selected HDD shows a sign before it.

[Hard Disk Drive List]
	Model Name	Capacity		Type/Status
HDD0:	HDS722516VLSA80	XXX	GB	Non-RAID
HDD1:	HDS722516DLA380	XXX	GB	Non-RAID

4.Key in the RAID volume capacity. Use the up/down arrow to choose the block size. The default value indicates the maximum allowed capacity.

[Create New RAID]

Name : JRAID

Level: 0-Stripe

Disks: Select Disk

Block: 128 KB

Size : 319 GB

Confirm Creation

5-50 Chapter 5: Software support