Solving a Mirror conflict

A Mirror conflict occurs when both disks in a RAID 1 (Mirror) configuration are unplugged from the system in turn, then plugged in again. Since both disks contain exactly the same data, the system will be unable to determine which of the two

is the source drive. This option allows you to set the source drive and rebuild the Mirror drive according to the contents of the source drive.

To solve a Mirror conflict:

1.In the main JMB363 RAID BIOS menu, highlight Solve Mirror Conflict using the up/down arrow key then press <Enter>.

[Main Menu]

Create RAID Disk Drive

Delete RAID Disk Drive

Revert HDD to Non-RAID

Solve Mirror Conflict

Rebuild Mirror Drive

Save and Exit Setup

Exit Without Saving

2.Use the space bar to select the HDD that you want to set as source drive. The selected HDD shows a sign before it.

3.Using the <TAB>, move to the RAID Disk Drive List menu and highlight the RAID set that you want to rebuild. Press <Del> to begin rebuilding the Mirror configuration.

A status bar at the bottom of the screen shows the progress of the rebuilding.

JMicron Technology Corp. PCI-to-SATA II/IDE RAID Controller BIOS v0.97

[Main Menu]

Create RAID Disk Drive Delete RAID Disk Drive Revert HDD to Non-RAID Solve Mirror Conflict Rebuild Mirror Drive Save and Exit Setup Exit Without Saving

[RAID Disk Drive List]

Model Name

Members(HDDx)

RDD0: JRAID

 

[Hard Disk Drive List]

 

 

 

 

Model Name

Capacity

Type/Status

 

HDD0: HDS722516VLSA80

164

GB

RAID Inside

 

HDD1: HDS722516DLA380

164

GB

RAID Inside

 

 

 

 

 

 

 

 

 

 

RAID Level

Capacity

Status

 

1-Mirror

XXX GB

Rebuild

01

Rebuilding... 01%, please wait...

5-54

Chapter 5: Software support