Asus P5KPL-AM •Reset button (2-pinRESET), P5KPL-AMSystem Panel Connector, •System power LED (2-pinPWRLED), 11.System panel connector (10-1pin F_PANEL)

11.System panel connector (10-1 pin F_PANEL)

This connector supports several chassis-mounted functions.

	F_PANEL
	PWR LED PWR BTN
AM	GND PWR -PLED PLED+
P5KPL-
	Reset Ground -IDELED IDELED+
	+HDLED RESET
P5KPL-AM System Panel Connector

•System power LED (2-pin PWRLED)

This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

•Hard disk drive activity LED (2-pin +HDLED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity

LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD.

•ATX power button/soft-off button (2-pin PWRBTN)

This connector is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF.

•Reset button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.

1-34 Chapter 1: Product introduction