2.4.4Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu.

Advanced Chipset Settings

WARNING: Setting wrong values in below sections may cause system to malfunction.

North Bridge Configuration

South Bridge Configuration

Configure North Bridge features.

North Bridge Configuration

North Bridge chipset Configuration

ENABLE: Allow

 

 

remapping of

Memory Remap Feature

[Disabled]

overlapped PCI memory

Configure DRAM Timing by SPD

[Enabled]

above the total

 

 

Initiate Graphic Adapter

[PEG/PCI]

physical memory.

 

Internal Graphics Mode Select

[Enabled, 8MB]

DISABLE: Do not allow

 

 

PEG Port Configuration

 

remapping of memory

 

 

PEG Force x 1

[Disabled]

 

Video Function Configuration

Memory Remap Feature [Enabled]

Allows you to enable or disable the remapping of overlapped PCI memory above the total physical memory. Configuration options: [Enabled] [Disabled]

Configure DRAM Timing by SPD [Enabled]

Allows you to enable or disable configurating DRAM Timing by SPD. Configuration options: [Enabled] [Disabled]

Initiate Graphic Adapter [PEG/PCI]

Allows you to select the graphics controller as the primary boot device. Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]

Internal Graphics Mode Select [Enabled, 8MB]

Allows you to select the amout of system memory used by the Interanal graphics device. Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]

PEG Port Configuration

PEG Force x1 [Disabled]

Allows you to enable or disable the PEG Forec x 1. Configuration options: [Enabled] [Disabled]

ASUS P5KPL-AM

2-23