Resetting a RAID set hard disks drive

Take caution before you reset a RAID volume HDD to non-RAID. Resetting a RAID volume HDD deletes all internal RAID structure on the drive.

To reset a RAID set hard disk drive:

1.From the utility main menu, select [3. Reset Disks to Non-RAID], then press <Enter> to display the following screen.

[ RESET RAID DATA ]

Resetting RAID data will remove the internal RAID structures from the selected RAID disks. By removing these structures the drive will revert back to a Non-RAID disk.

WARNING: Resetting a disk causes all data on the disk to be lost.

Port Drive Model

Serial #

Size

Status

0

STXXXXXXXXX

XXXXXXXX

XX.0GB

Member Disk

1

STXXXXXXXXX

XXXXXXXX

XX.0GB

Member Disk

 

Select the disk that should be reset

 

[ ]-Previous/Next

[Space]-Selects

[Enter]-Selection Complete

2.Use the up or down arrow keys to highlight the RAID set drive you want to reset, then press <Space> to select.

3.Press <Enter> to reset the RAID set drive. A confirmation window appears.

4.Press <Y> to reset the drive; otherwise, press <N> to return to the utility main menu.

5.Follow steps 2 to 4 to select and reset other RAID set drives.

5 - 12

Chapter 5: Driver installation