3.The utility main window appears. Use the arrow keys to select an option from the Management Menu, then press <Enter>. Refer to the Management Menu descriptions below.
At the bottom of the screen is the legend box. The keys on the legend box allow you to navigate through the setup menu options or execute commands. The keys on the legend box vary according to the menu level.
| M e n u | Description |
| Configure | Allows you to create RAID 0, RAID 1, or RAID 10 set using |
|
| the Easy Configuration or the New Configuration command. |
|
| This menu also allows you to view, add, or clear RAID |
|
| configurations or select the boot drive |
| Initialize | Allows you to initialize the logical drives of a created RAID |
|
| set |
| Objects | Allows you to initialize logical drives or change the logical |
|
| drive parameters |
| Rebuild | Allows you to rebuild failed drives |
| Check Consistency | Allows you to check the data consistency of the logical |
|
| drives of a created RAID set |
The LSI Logic Embedded SATA RAID Setup Utility allows you to create a RAID 0 or RAID 1 set using two types of configurations: Easy and New.
In Easy Configuration, the logical drive parameters are set automatically including the size and stripe size (RAID 1 only).
In New Configuration, you manually set the logical drive parameters and assign the set size and stripe size (RAID 1 only).
5 - 14 | Chapter 5: Driver installation |