Asus P5ND2 SE manual 45

11. ATX power connectors

(24-pi n EATXPWR, 4-pi n ATX12V)

These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

ATX12V		EATXPWR
+12V DC	+12V DC	+3 Volts	+3 Volts
GND	GND
		‑12 Volts	+3 Volts
		Ground	Ground
		PSON#	+5 Volts
		Ground	Ground
P5ND2 SE		Ground	+5 Volts
		Ground	Ground
		‑5 Volts	Power O
		+5 Volts	+5V Standby
		+5 Volts	+12 Volts
		+5 Volts	+12 Volts
P5ND2 SE ATX Power Connector		Ground	+3 Volts

•For a fully configured system, we recommend that you use a power

supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 400 W.

•Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot.

•Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

ASUS P5ND2 SE 1-33