4.4.4Onboard Devices Configuration
Onboard AC’97 | Audio | [Auto] |
Onboard LAN |
| [Enabled] |
Onboard LAN | Boot ROOM | [Disabled] |
Serial Port1 Address | [3F8/IRQ4] | |
Serial Port2 Address | [2F8/IRQ3] | |
Parallel Port | Address | [378] |
Parallel Port | Mode | [ECP] |
ECP Mode DMA Channel | [DMA3] | |
Parallel Port IRQ | [IRQ7] | |
Onboard Game/MIDI Port | [200/330] | |
OnBoard AC’97 Audio [Auto]
[Auto] allows the BIOS to detect whether you are using any audio device. If an audio device is detected, the onboard audio controller is enabled; if no audio device is detected, the controller is disabled.
Configuration options: [Disabled] [Auto]
OnBoard LAN [Enabled]
Allows you to enable or disable the onboard LAN controller. Configuration options: [Disabled] [Enabled]
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the option ROM in the onboard LAN controller. This item appears only when the Onboard LAN item is set to Enabled. Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Address [2F8/IRQ3]
Allows you to select the Serial Port2 base address.
Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
4 - 24 | Chapter 4: BIOS setup |