Stripe Size - sets the stripe size.

Delete RAID Settings & Partition - deletes a selected RAID set and partition.

Delete All RAID Settings & Partition - deletes all current RAID set(s) and partition(s).

Rebuild RAID array - rebuilds mirror drive(s).

On the upper-right side of the screen is the legend box. The keys on the legend box allow you to navigate through the setup menu options. The following lists the keys found in the legend box and their corresponding functions.

SPACE : Select an item

↑, ↓ : Move cursor to the next item Enter : Confirms a selected item ESC : Exit

Creating a RAID 0 configuration

To create a RAID 0 set:

1.From the ULI RAID BIOS Setup utility menu, move the cursor to Create RAID 0 Striping for Performance then press <Enter>.

2.Use the up or down arrow keys to select a drive then press <Space> or <Enter>. The striped mark “S” appears before a selected drive.

3.Repeat step 2 to select the second drive.

4.The utility prompts the following warning message:

Data on RAID drives will be deleted (Y/N)?

Press <Y> to continue or press <N> to return to menu.

5.Key-in a RAID name composed of a maximum of eight (8) alpha-numeric characters then press <Enter>. Special characters or symbols are not allowed.

6.The utility displays the RAID Array settings at the bottom of the screen.

5 - 18

Chapter 5: Software support