2.When the Level item is highlighted, use the up/down arrow key to select the

RAID set that you want to create.

[Create New RAID]

Name : JRAID

Level: 0-Stripe

Disks: Select Disk

Block: 128 KB

Size : 319 GB

Confirm Creation

[Create New RAID]

Name : JRAID

Level: 1-Mirror

Disks: Select Disk

Block: N/A

Size : 159 GB

Confirm Creation

3.When the Disks item is highlighted, use the up/down arrow key to highlight an HDD that you want to belong to the RAID set, then press the space bar to confirm selection. Repeat the process until the HDDs are selected.

A selected HDD shows a sign before it.

 

[Hard Disk Drive List]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model Name

 

Capacity

Type/Status

 

HDD0:

HDS722516VLSA80

XXX

GB

Non-RAID

 

HDD1:

HDS722516DLA380

XXX

GB

Non-RAID

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.Key in the RAID volume capacity. Use the up/down arrow to choose the block size. The default value indicates the maximum allowed capacity.

[Create New RAID]

Name : JRAID

Level: 0-Stripe

Disks: Select Disk

Block: 128 KB

Size : 319 GB

Confirm Creation

3-14

Chapter 3: Software support