12.System panel connector (20-8 pin F_PANEL)
This connector supports several chassis-mounted functions.
| PLED | SPEAKER |
| PLED+ | PLED- | +5V | Ground Ground Speaker |
| PANEL | | | |
| P5VD2-X | | PWR Ground | Reset Ground |
| IDELED+ IDE LED- | |
| IDE_LED | | RESET |
| PWRSW |
| | |
*Requires an ATX power supply.
P5VD2-X System panel connector
•System power LED
This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
•Hard disk drive activity LED
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD.
•System warning speaker
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings.
•Power/Soft-off button
This connector is for the system power button. Pressing the power button turns the system ON or puts the system in SLEEP or SOFT-OFF mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF.
•Reset button
This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.