9.The RAID drivers are copied to the floppy disk. After creating a RAID driver disk, eject the floppy disk, then write-protect it to prevent computer virus infection.

10.Press any key to return to the Makedisk menu.

To create a RAID driver disk in Windows® environment:

1.Place the motherboard support CD in the optical drive.

2.Go to the Make Disk menu, then select the RAID driver disk you wish to create:

•Click Intel ICH7R 32bit RAID Driver to create an Intel® ICH7R RAID driver disk for a 32-bit system.

•Click Intel ICH7R 64bit RAID Driver Disk to create an Intel® ICH7R RAID driver disk for a 64-bit system.

•Click Marvell 6145 32bit/64bit Driver for P5W64 to create a Marvell® 88SE6145 SATA RAID driver disk for a 32-bit/64-bit system.

Refer to section “5.2.4 Make Disk menu” for details.

3.Insert a formatted high-density floppy disk to the floppy disk drive.

4.Follow screen instructions to complete the process.

5.After creating a RAID driver disk, eject the floppy disk, then write-protect it to prevent computer virus infection.

To install the RAID driver:

1.Install an operating system to the selected hard disk drive. During installation, the computer prompts you to press the F 6 key if you are installing a third-party SCSI or RAID driver.

2.Press <F6>, then insert the RAID driver disk to the floppy disk drive.

3.Follow screen instructions to complete the installation.

5 - 40

Chapter 5: Software support