2.4.2Memory configurations
You may install 1GB and 2GB unbuffered and non‑ECC DDR3 DIMMs into the DIMM sockets.
• You may install varying memory sizes in Channel A, Channel B and Channel C. The system maps the total size of the
•Due to Intel spec definition, X.M.P. DIMMs and
•According to Intel CPU spec, DIMMs with voltage requirement over 1.65V may damage the CPU permanently. We recommend you install the DIMMs with the voltage requirement below 1.65V.
•Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor.
•Due to the memory address limitation on
•This motherboard does not support DIMMs made up of 256 megabit (Mb) chips or less.
• The default memory operation frequency is dependent on its SPD. Under the default state, some memory modules for overclocking may operate at a lower frequency than the
•For system stability, use a more efficient memory cooling system to support a full memory load (6 DIMMs) or overclocking condition.
P6T Deluxe V2 Motherboard
Qualified Vendors Lists (QVL) DDR3-2000MHz capability
|
|
| SS/ | Chip |
| Timing |
| DIMM socket | ||
Vendor | Part No. | Size | Chip NO. | Voltage | support (Optional) | |||||
DS | Brand | DIMM (BIOS) | A* | B* | ||||||
|
|
|
|
| ||||||
|
|
|
|
|
|
|
| |||
KINGSTON | KHX16000D3K2/2GN | 2GB (Kit of 2) | SS | N/A |
| 2.0 | • | • | ||
(EPP) | Package |
| ||||||||
|
|
|
|
|
|
|
| |||
KINGSTON | KHX16000D3K3/3GX | 3GB (Kit of 3) | SS | N/A | 1.65 | • | • | |||
(XMP) | Package | |||||||||
|
|
|
|
|
|
| ||||
Gingle | 9CAASS37AZZ01D1 | 2GB | DS | N/A |
| • | • | |||
Package |
| |||||||||
|
|
|
|
|
|
|
|
|
ASUS P6T Deluxe V2 |