ASUS Q-Connector (system panel)You can use the ASUS Q-Connector to connect/disconnect chassis front panel cables in a few steps. Refer to the instructions below to install the ASUS Q-Connector.
1.Connect the front panel cables to the ASUS Q-Connector.
Refer to the labels on the Q-Connector to know the detailed pin definitions, then match them to the respective front panel cable labels.
The labels of the front panel cables may differ from chassis made by different manufacturers.
2.Install the ASUS Q-Connector to the system panel connector, making sure the orientation matches the labels on the motherboard.
3.The front panel functions are now enabled. The figure shows the
Q-Connector properly installed on the motherboard.
