3 Chapter
3.8.2Boot Settings Configuration
|
| BIOS SETUP UTILITY |
|
| |
|
|
|
| Boot |
|
| Boot Settings Configuration |
|
|
| Allows BIOS to skip |
| Quick Boot | [Enabled] |
| certain tests while | |
|
| booting. This will | |||
| Full Screen Logo | [Enabled] |
| ||
|
| decrease the time | |||
| AddOn ROM Display Mode | [Force BIOS] |
| ||
|
| needed to boot the | |||
| Bootup | [On] |
| ||
|
| system. | |||
| Wait For ‘F1’ If Error | [Enabled] |
| ||
|
|
| |||
| Hit ‘DEL’ Message Display | [Enabled] |
|
| |
| POST State LEDs | [Enabled] |
|
| |
|
|
|
|
|
|
Quick Boot [Enabled]
[Disabled] | When set to [Disabled], BIOS performs all the POST items. |
[Enabled] | When set to [Enabled], BIOS skips some power on self tests (POST) while |
| booting to decrease the time needed to boot the system. |
Full Screen Logo [Enabled]
[Disabled] | Disables the full screen logo display feature. |
[Enabled] | Enables the full screen logo display feature. |
| Set this item to [Enabled] to use the ASUS MyLogo 2™ feature. |
AddOn ROM Display Mode [Force BIOS]
[Force BIOS] | The |
| sequence. |
[Keep Current] | The |
| manufacturer had set the |
Bootup Num-Lock [On]
[Off] | Sets the |
[On] | Sets the |
Wait For ‘F1’ If Error [Enabled]
[Disabled] | Disables this function. |
[Enabled] | The system waits for the <F1> key to be pressed when error occurs. |
Hit ‘DEL’ Message Display [Enabled]
[Disabled] | Disables this function. |
[Enabled] | The system displays the message “Press DEL to run Setup” during POST. |
POST State LEDs [Enabled]
[Enabled] | Turn on onboard device LEDs in the order of the device POST sequence. |
[Disabled] | Disables this function. |
Chapter 3: BIOS setup |