![](/images/backgrounds/166349/166349-12294x1.png)
3 Chapter
|
| BIOS SETUP UTILITY |
|
| |
|
|
|
| Boot |
|
| Security Settings |
|
|
| <Enter> to change |
| Supervisor Password | : Installed |
| password. | |
|
| <Enter> again to | |||
| User Password | : Installed |
| ||
|
| disabled password. | |||
|
|
|
|
| |
| Change Supervisor Password |
|
| ||
| User Access Level | [Full Access] |
|
| |
| Change User Password |
|
|
|
|
| Clear User Password |
|
|
|
|
| Password Check | [Setup] |
|
| |
|
|
|
|
|
|
This item allows you to select the access restriction to the Setup items.
[No Access] | Prevents user access to the Setup utility. |
[View Only] | Allows access but does not allow change to any field. |
[Limited] | Allows changes only to selected fields, such as Date and Time. |
[Full Access] | Allows viewing and changing all the fields in the Setup utility. |
Select this item to set or change the user password. The User Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a User Password:
1.Select the Change User Password item and press <Enter>.
2.In�� the��� password�������� box,���� key��� in�� a� password�������� containing���������� up�� to�� six��� letters������� or�� numbers,�������� or�� both, then press <Enter>.
3.Confirm the password when prompted.
The message Password Installed appears after you set your password successfully. To change the user password, follow the same steps as in setting a user password.
Clear User PasswordSelect this item to clear the user password.
Password Check [Setup][Setup] | BIOS checks for user password when accessing the Setup utility. |
[Always] | BIOS checks for user password both when accessing Setup and booting |
| the system. |
Chapter 3: BIOS setup |