Care of Your Fan
Here are some suggestions to help you maintain your fan.
1.Because of the fan's natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. (It is not necessary to remove fan from ceiling.)
2.Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning. Use only a soft brush or
3.You can apply a light coat of furniture polish to the wood blades for additional protection and enhanced beauty. Cover small scratches with a light application of shoe polish.
4.There is no need to oil your fan. The motor has permanently lubricated sealed ball bearings.
Troubleshooting
PROBLEM | SOLUTION | ||
Fan will not start | 1. | Check main and branch circuit fuses or breakers. | |
| 2. | Check line wire connections to the fan and switch wire | |
|
| connections in the switch housing. | |
Fan sounds noisy | 1. | Make sure all motor housing screws are snug. | |
| 2. | Make sure the screws that attach the fan blade bracket to the | |
|
| motor hub is tight. | |
| 3. | Make sure wire nut connections are not rattling against each | |
|
| other or the interior wall of the switch housing. | |
| 4. | Allow a | |
|
| associated with a new fan disappear during this time. | |
| 5. | If using the ceiling light kit, make sure the screws securing | |
|
| the glassware are tight. | |
|
| Check that the light bulb is also secure. | |
| 6. | Make sure there is a short distance from the ceiling to the | |
|
| canopy. It should not touch the ceiling. | |
| 7. | Make sure your ceiling box is secure and rubber isolator | |
|
| pads are used between mounting bracket and outlet box. | |
|
| WARNING |
|
|
|
| |
|
| MAKE SURE THE POWER IS OFF AT THE ELECTRICAL | |
|
| PANEL BOX BEFORE YOU ATTEMPY ANY REPAIRS. | |
|
| REFER TO THE SECTION, “MAKING ELECTRICAL | |
|
| CONNECTIONS”. | |
|
|
|
|
10