Blade Balancing
The following procedure should correct most fan wobble. Check after each step.
1.Check that all blade and blade arm screws are secure.
2.Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling above the tip of one of the blades. Measure from a point on the center of each blade to the point on the ceiling. Measure this distance as shown in Figure 11. Rotate the fan until the next blade is positioned for measurement. Repeat for each blade. Measurements deviation should be within 1/8˝. Run the fan for 10 Minutes.
3.Use the enclosed Blade Balancing Kit if the blade wobble is still noticeable.
Touching Ceiling |
Figure 11
7
