9.Intel® B75 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~5 [blue])

These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via Serial ATA 3.0 Gb/s signal cables.

SATA3G_1

SATA3G_2

GND RSATA RXP1 RSATA RXN1 GND RSATA TXN1 RSATA TXP1 GND

GND RSATA RXP2 RSATA RXN2 GND RSATA TXN2 RSATA TXP2 GND

SATA3G_3

SATA3G_4

GND RSATA RXP3 RSATA RXN3 GND RSATA TXN3 RSATA TXP3 GND

GND RSATA RXP4 RSATA RXN4 GND RSATA TXN4 RSATA TXP4 GND

SATA3G_5

 

P8B75-M LE

 

GND RSATA TXP5 RSATA TXN5 GND RSATA RXN5 RSATA RXP5 GND

 

P8B75-M LE Intel® SATA 3.0Gb/s connectors

• You must install Windows® XP Service Pack 3 or later version before using Serial ATA hard disk drives.

• When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI]. See section 2.5.3 SATA Configuration for details.

10. Intel® B75 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1 [gray])

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables.

P8B75-M LE

SATA6G_1 GND RSATARXP1_ RSATARXN1_ GND RSATA_TXN1 RSATA_TXP1 GND

P8B75-M LE Intel® SATA 6.0Gb/s connector

•You must install Windows® XP Service Pack 3 or later version before using Serial ATA hard disk drives.

•When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI]. See section 2.5.3 SATA Configuration for details.

1-28

Chapter 1: Product introduction