2.5.4System Agent Configuration
Memory Remap Feature [Enabled]
[Enabled] | Allow you to enable remapping the memory above 4GB. |
[Disabled] | Disables this function. |
Graphics Configuration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [Auto] [iGPU] [PCIE] [PCI]
iGPU Memory [64M]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by the iGPU. Configuration options: [32M] [64M] [96M] [128M] ~ [416M] [448M] [480M] [512M]
Render Standby [Enabled]
Allows you to enable the Intel Graphics Render Standby support to reduce the iGPU power use when idle. Configuration options: [Disabled] [Enabled]
iGPU
Allows you to enable or disable the iGPU
NB PCIe Configuration
Allows you to configure the NB PCI Express settings.
PCIEX16_1 Link Speed [Auto]
Allows you to configure the PCIE x16_1 speed. Configuration options: [Auto] [Gen1] [Gen2]
2.5.5AMT Configuration
The items in this menu allow you to change the Intel® Active Management Technology (AMT) feature.
Intel AMT [Enabled]
Allow you to enable or disable the Intel® Active Management Technology (AMT) in the BIOS extension. Configuration options: [Enabled] [Disabled]
• iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled, this requires additional firmware in the SPI device.
•The following two items become configurable only when you set the Intel AMT item to [Enabled].
BIOS Hotkey Pressed [Disabled]
Allow you to enable or disable using the BIOS hotkeys. Configuration options: [Enabled] [Disabled]
MEBx Selection Screen [Disabled]
Allows you to enable or disable the MEBx selection screen. Configuration options: [Enabled] [Disabled]
Un-Configure ME [Disabled]
Sets this item to [Disabled] to unconfigure AMT/ME without using a password or set it to [Enabled] to use a password. Configuration options: [Enabled] [Disabled]
Chapter 2: BIOS information |