1.Intel® B75 Serial ATA 6.0 Gb/s connector
This connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables.
2 Chapter
SATA6G_1
GNDRSATA RXP1_RSATA RXN1_GNDRSATA_TXN1RSATA TXP1_GND
When using NCQ, set the SATA Mode Selection in the BIOS to [AHCI]. Refer to section 3.5.3 SATA Configuration for details.
2. LPT connector
The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT standardizes as IEEE 1284, which is the parallel port interface on IBM
|
| LPT | |
|
| SLCT | |
| GND | PE | |
| GND | BUSY | |
| GND | ACK# | |
GND | PD7 | ||
GND | PD6 | ||
| |||
| GND | PD5 | |
| GND | PD4 | |
| GND | PD3 | |
| SLIN# | PD2 | |
| INIT# | PD1 | |
| ERR# | PD0 | |
| AFD | STB# |
PIN 1
Chapter 2: Hardware information |