3.5.4System Agent Configuration

UEFI BIOS Utility - Advanced Mode

Main

Ai Tweaker

Advanced

Monitor

Back

Advanced\ System Agent Configuration >

 

System Agent Bridge Name

 

SandyBridge

 

 

Enabled

Memory Remap Feature

 

>Graphics Configuration

>NB PCIe Configuration

BootTool

Enable or disable memory remap above 4G.

3 Chapter

Memory Remap Feature [Enabled]

[Enabled]

Allow you to enable remapping the memory above 4GB.

[Disabled]

Disables this function.

Graphics Configuration

Primary Display [Auto]

Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [Auto] [iGPU] [PCIE] [PCI]

iGPU Memory [64M]

Allows you to select the amount of system memory allocated to DVMT 5.0 used by the iGPU. Configuration options: [32M] [64M] [96M] [128M] ~ [448M] [480M] [512M] [1024M]

Render Standby [Enabled]

Allows you to enable the Intel Graphics Render Standby support to reduce the iGPU power use when idle. Configuration options: [Disabled] [Enabled]

iGPU Multi-Monitor [Enabled]

Allows you to enable or disable the Lucid Virtu Universal MVP support for both the integrated and discrete graphics. The iGPU shared memory size will be fixed at 64MB. Configuration options: [Disabled] [Enabled]

NB PCIe Configuration

Allows you to configure the NB PCI Express settings.

PCIEX16_1 Link Speed [Auto]

Allows you to configure the PCIE x16_1 speed. Configuration options: [Auto] [Gen1] [Gen2]

3-18

Chapter 3: BIOS setup