6.USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices.

7.USB 2.0 ports 3 and 4 (P8H61-MX R2.0 only). These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0 devices.

USB 3.0 ports 1 and 2 (P8H61-MX USB3 only). These two 9-pin Universal Serial Bus (USB) ports are for USB 3.0 devices.

• DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows® operating system.

•Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows® OS environment and after the USB 3.0 driver installation.

•USB 3.0 devices can only be used as data storage only.

•We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices.

8.VGA port. This 15-pin port is for a VGA monitor or other VGA-compatible devices.

9.DVI-D port. This port is for any DVI-D compatible device. DVI-D can’t be converted to output RGB Signal to CRT and isn’t compatible with DVI-I.

10.USB 2.0 ports 5 and 6. These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices.

1.7.2Internal connectors

1.Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.

P8H61-MX R2.0

AGND

NC

SENSE1 RETUR

SENSE2 RETUR

AAFP

 

 

 

PORT1 L

PORT1 R

PORT2 R

SENSE SEND PORT2 L

HD-audio-compliant

pin definition

AGND NC NC

NC

PIN 1

Line out_L

NC

Line out_R

MICPWR

MIC2

Legacy AC’97

compliant definition

P8H61-MX Series Front panel audio connector

Chapter 1: Product introduction

1-21