3.CPU and chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN)

Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.

CPU_FAN

P8H61-MX R2.0

GND

CPU FAN PWR

CPU FAN IN

CPU FAN PWM

CHA_FAN

Rotation +12V

GND

P8H61-MX Series Fan connectors

Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors!

The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan power.

4.USB connectors (10-1 pin USB78, USB910)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to

480 Mbps connection speed.

USB78

USB910

USB+5V USB P6- USB P6+

GND NC

USB+5V USB P8- USB P8+

GND NC

P8H61-MX R2.0

 

 

 

PIN 1

 

PIN 1

 

USB+5V USB P5- USB P5+

GND

USB+5V USB P7- USB P7+

GND

P8H61-MX Series USB2.0 connectors

Chapter 1: Product introduction

1-23