5.System panel connector (10-1 pin F_PANEL)

This connector supports several chassis-mounted functions.

F_PANEL

 

BTN

 

 

 

PWR

GND

Reset

0.

 

PWR

Ground

LEDPWR

PLED-

HD_LED-

R2P8H61I-

PLED+

HD_LED+

 

 

 

 

 

PIN 1

P8H61-I R2.0 System panel connector

+HD_LED RESET

•System power LED (2-pin PLED)

This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

•Hard disk drive activity LED (2-pin +HDLED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD.

•Power/Soft-off button (2-pin PWRBTN)

This 2-pin connector is for the system power button.

•Reset button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.

6.Digital audio connector (4-1 pin SPDIF-OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis.

I-P8H61 0.R2

+5V

SPDIFOUT GND

SPDIF_OUT

P8H61-I R2.0 Digital audio connector

The S/PDIF module is purchased separately.

ASUS P8H61-I R2.0

1-20