7.USB 2.0 connector (10-1 pin USB78, USB56)

This connector is for a USB 2.0 port. Connect the USB module cable to this connector, then install the module to a slot opening at the back of the system chassis. This

USB connector complies with USB 2.0 specifications and supports up to 480 Mbps connection speed.

I-P8H61 0.R2

USB78

USB56

PIN 1

 

 

PIN 1

 

 

USB+5V

 

 

 

 

USB+5V

USB+5V

 

 

 

 

USB+5V

 

 

 

 

 

 

USB_P7-

 

 

 

USB_P8-

USB_P5-

 

 

 

USB_P6-

 

 

 

 

USB_P7+

 

 

 

USB_P8+

USB_P5+

 

 

 

USB_P6+

 

 

 

 

GND

 

 

 

GND

GND

 

 

 

GND

 

 

 

 

 

 

 

 

 

NC

 

 

 

 

 

NC

 

 

 

 

 

 

 

 

 

 

P8H61-I R2.0 USB2.0 connectors

Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard!

The USB module cable is purchased separately.

8.Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.

AGND NC SENSE1 RETUR

SENSE2 RETUR

AGND NC NC

NC

AAFP

I-P8H61 0.R2

LPORT1 RPORT1 RPORT2 SEND LPORT2 _SENSE HD-audio-compliant

pin definition

PIN 1

Line out_L

NC

Line out_R

MICPWR

MIC2

Legacy AC’97

compliant definition

P8H61-I R2.0 Front panel audio connector

•We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.

•If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an AC'97 front panel audio module to this connector, set the item to [AC97]. By default, this connector is set to [HD]. See section 2.5.6 Onboard Devices Configuration for details.

1-21

Chapter 1: Product introduction