2.Tick On in the Status field to enable the function, and click Save.

Select and click to enable or disable the function

Click to enable or disable battery saving mode. This function only applies to notebooks.

Click to enable or disable the timer. When enabled, move the scroll

Click to save the

Click to cancel the

bar to the desired time. When the system is idle for more than the time

settings made.

settings made.

period you set, the system automatically goes into the Intel® Rapid Start

 

 

mode. Default time is 10 minutes.

 

 

Recovering the partition

This procedure allows you to delete the Intel® Rapid Start Technology from your system, and recover the partition you made for the Intel Rapid® Start Technology installation.

1.Run the Command Prompt tool.

2.Type diskpart and press Enter.

3.At the diskpart prompt, type list disk after DISKPART, and press Enter.

4.Select the disk (SSD) where the Intel® Rapid Start Technology is installed for volume recovery, type select disk x (x = number), and press Enter.

The value “x” refers to a disk number where you want to delete the store partition.

1-48

Chapter 1: Product introduction