Asus P8H77-V Serial Port [Enabled], Change Settings [IO=3F8h; IRQ=4], 3.5.7APM, [Enabled], [Power On], [Disabled], [Ctrl-Esc], [Disabled], [Power Off], [Space Bar]

Serial Port Configuration

The sub-items in this menu allow you to set the serial port configuration.

This item functions only if there is a serial port (COM1) connector on the motherboard.

Serial Port [Enabled]

Allows you to enable or disable the serial port (COM). Configuration options: [Enabled] [Disabled]

Change Settings [IO=3F8h; IRQ=4]

Allows you to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]

3.5.7APM

	UEFI BIOS Utility - Advanced Mode						Exit
	Main		Ai Tweaker	Advanced	Monitor	Boot	Tool
	Back	Advanced\ APM >
					Power Off	Select AC power state when power is
	Restore AC Power Loss
	Power On By PS/2 Keyboard				Disabled	re-applied after a power failure.
	Power On By PS/2 Mouse				Disabled
	Power On By PCI				Disabled
	Power On By PCIE				Disabled
	Power On By Ring				Disabled
	Power On By RTC				Disabled
Restore AC Power Loss [Power Off]
[Power On]			The system goes into on state after an AC power loss.
[Power Off]			The system goes into off state after an AC power loss.
[Last State]			The system goes into either off or on state, whatever the system state was
			before the AC power loss.
Power On By PS/2 Keyboard [Disabled]
[Disabled]			Disables the Power On by a PS/2 keyboard.
[Space Bar]			Sets the Space Bar on the PS/2 keyboard to turn on the system.
[Ctrl-Esc]			Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.
[Power Key]			Sets Power key on the PS/2 keyboard to turn on the system. This feature
			requires an ATX power supply that provides at least 1A on the +5VSB lead.
Power On By PS/2 Mouse [Disabled]
[Disabled]			Disables the Power On by a PS/2 mouse.
[Enabled]			Enables the Power On by a PS/2 mouse. This feature requires an ATX
			power supply that provides at least 1A on the +5VSB lead.

Chapter 3

ASUS P8H77-V 3-21