3.USB 3.0 connector (20-1 pin USB3_34)

This connector is for additional USB 3.0 ports, and complies with the USB 3.0 specificaton that supports up to 5Gbps connection speed. A USB 3.0 front panel cable available with your system chassis can be used with this connector to set up front panel USB 3.0 ports.

USB3_34

P8Z77-I DELUXE/WD

P8Z77-I DELUXE USB3.0 Front panel connector

Due to Intel® limitations, USB3_34 connector ports run at USB 3.0 speeds under Windows® 7 or later versions.

4.USB 2.0 connectors (10-1 pin USB56~USB78)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to

480 Mbps connection speed.

 

 

USB+5V USB P8- USB P8+

GND NC

 

USB78

 

 

 

PIN 1

USB+5V USB P7- USB P7+

GND

 

 

DELUXE/WD

 

USB+5V USB P6- USB P6+

GND NC

P8Z77-I

 

 

 

 

USB56

 

 

 

PIN 1

USB+5V USB P5- USB P5+

GND

 

 

P8Z77-I DELUXE/WD USB2.0 connector

1 Chapter

1-28

Chapter 1: Product introduction